Search results for "disturbance rejection"

Load frequency regulation using observer based non-linear sliding mode control

2019

Abstract In this paper, the generalized extended state observer (GESO) and non-linear sliding mode control (SMC) are merged together to study the frequency deviation problem in multi-area power system. In study, the GESO is used not only for state and disturbance estimation but also for disturbance rejection of the system. The said observer ensures accurate estimation of the actual states leading to convergence of estimation error to zero. The non-linear SMC is used to increase the damping ratio of the system whenever, any perturbations occurs. The proposed observer based controller is compared with an existing two-layer active disturbance rejection control (ADRC) and also validated on larg…

Non-linear active disturbance rejection control for upper limb rehabilitation exoskeleton

2020

Trajectory tracking in upper limb rehabilitation exercises is utilized for repeatability of joint movement to improve the patient’s recovery in the early stages of rehabilitation. In this article, non-linear active disturbance rejection control as a combination of non-linear extended-state observer and non-linear state error feedback is used for the sinusoidal trajectory tracking control of the two-link model of an upper limb rehabilitation exoskeleton. The two links represent movements like flexion/extension for both the shoulder joint and the elbow joint in the sagittal plane. The Euler–Lagrange method was employed to acquire a dynamic model of an upper limb rehabilitation exoskeleton. T…

Improving the speed estimation by load torque estimation in induction motor drives: an MRAS and NUIO approach

2021

This paper proposes the application of the NUIO inside a FOC induction motor drive for the simultaneous estimation of the load torque and the rotor speed. The idea is to estimate at first the speed with the current model in parallel with a reference model developed on the basis of the voltage model of the induction machine. Then, the estimated speed is given as input to a nonlinear unknown input observer (NUIO) to estimate the load torque. This estimation is then used to correct the previous estimation of the speed. Simulation and experimental results confirm the goodness of the method for an extended range of speed and different load torque, and they confirm the reduction of error in trans…

Improved Active Disturbance Rejection Control for Trajectory Tracking Control of Lower Limb Robotic Rehabilitation Exoskeleton.

2020

Neurological disorders such as cerebral paralysis, spinal cord injuries[acronym](SCI), and strokes, result in the impairment of motor control and induce functional difficulties to human beings like walking, standing, etc. Physical injuries due to accidents and muscular weaknesses caused by aging [english]affectsaffect people and can cause them to lose their ability to perform daily routine functions. In order to help people recover or improve their dysfunctional activities and quality of life after accidents or strokes, assistive devices like exoskeletons and orthoses are developed. Control strategies for control of exoskeletons are developed with the desired intention of improving the qual…

Nonlinear Feedback Control and Stability Analysis of a Proof-of-Work Blockchain

2017

In this paper a novel feedback controller and stability analysis of a blockchain implementation is developed by using a control engineering perspective. The controller output equals the difficulty adjustment in the mining process while the feedback variable is the average block time over a certain time period. The computational power (hash rate) of the miners is considered a disturbance in the model. The developed controller is tested against a simulation model with constant disturbance, step and ramp responses as well as with a high-frequency sinusoidal disturbance. Stability and a fast response is demonstrated in all these cases with a controller which adjusts it's output at every new blo…

2014

A feedback control method based on an extended state observer (ESO) method is implemented to vibration reduction in a typical semiactive suspension (SAS) system using a magnetorheological (MR) damper as actuator. By considering the dynamic equations of the SAS system and the MR damper model, an active disturbance rejection control (ADRC) is designed based on the ESO. Numerical simulation and real-time experiments are carried out with similar vibration disturbances. Both the simulation and experimental results illustrate the effectiveness of the proposed controller in vibration suppression for a SAS system.

Active disturbance rejection control of linear induction motor

2017

This paper proposes the theoretical framework and the experimental application of the active disturbance rejection control to linear induction motors. Such a nonlinear control (ADRC) technique can be viewed as a particular kind of input-output linearization control, where the nonlinear transformation of the state is not computed by means of the model, but it is estimated online. Such an approach permits to cope with unmodelling dynamics, as well as uncertainty in the knowledge of the model parameters and exogenous disturbances. The effectiveness of the proposed ADRC control law has been verified both by numerical simulations and experimentally on a suitably developed test setup. Moreover, t…

Active Disturbance Rejection Control of Synchronous Reluctance Motors

2020

This paper describes how the ADRC (Active Disturbance Rejection Control) strategy can be successfully applied to SynRM (Synchronous Reluctance Motor) drives. The ADRC is an adaptive robust extension of the input-output Feedback Linearization Control (FLC). Its main feature is that the nonlinear transformation of the state is computed on-line and not by using the model. As a consequence, any unmodelled dynamics or uncertainty of the parameters can be addressed. The control strategy has been verified successfully with experimental tests confirming the high dynamic response of the drive.

Robust Active Disturbance Rejection Control of Induction Motor Systems Based on Additional Sliding-Mode Component

2017

This paper deals with motion control systems with induction motor, subject to severe requirements on both dynamics and steady-state behavior. The proposed control methodology could be viewed as an advancement of the standard field oriented control. It consists of two control loops, i.e., the rotor flux and the speed control loops, designed using the active disturbance rejection control method, with the aim to cope with both exogenous and endogenous disturbances, which are estimated by means of two linear extended state observers and then compensated. Moreover, with the aim of achieving total robustness, a sliding-mode based component is designed, in order to take into account disturbance es…